Press fit silicone pad, red silicone pad, green silicone pad

Product Description:Mainly consisting of two layers of low compression twisted silicone layers, with fiberglass cloth sandwiched in between as a reinforcement carrier, it has good temperature resistance, cushioning, and durability.

1、 Product structure analysis:

2、 Product scope of application:FPC flexible circuit board laminated silicone pad, also known as green/red silicone board, silicone rubber board, silicone rubber or silicone buffer pad, is mainly used in mobile phones, laptops and LCD screens PDA、 The CVL process is used for the production of FPC soft boards related to digital cameras, LCM, etc. It is a high-temperature production process for lamination and hot pressing, which plays a role in temperature equalization, pressure equalization, thermal conductivity, buffering, etc.

Application scope:

PCB board factory process compression bonding

FPC board factory press press

Other

3、 Product feature analysis:

1. The product is made of imported silicone raw materials, with a silicone composite material sandwiched between high temperature and high pressure resistant fiberglass cloth, which is not easily deformed during hot pressing;

2. The product has a thermal conductivity coefficient of 1.0, which enables rapid and uniform thermal conductivity, improving the quality of circuit boards, increasing production efficiency, saving energy, and reducing costs;

3. It has good buffering and rebound properties, avoiding scratches caused by hard contact between the heating plate and the laminated board, and extending the service life of the heating plate and the laminated board;

4. The surface of the product is smooth and flat, and can be customized with bright and matte surfaces according to customer requirements to ensure the qualification rate of the finished product during hot pressing; 5. This product can withstand high temperatures up to 250 ℃ and has high durability. It can be used continuously for more than 5000 hours at a high temperature of 190 ℃;

6. There is almost no silicone oil precipitation during the operation of this product, which avoids the contamination of the circuit board with silicone oil during the hot pressing process and causes product loss;

7. The product is uniform and flat, with no needle or concave points, excellent thickness tolerance, and improves product yield.

8. Matte products have a good release effect, ensuring that dust is not easily adhered during the manufacturing process.

9. The product is resistant to aging, solvents, corrosion, and is non-toxic and odorless, meeting environmental requirements.

Product Features:

http://mei-ho.com