Burnt iron plate, also known as silicon steel plate, burnt pair iron plate, Silicon steel sheet。 Burnt iron plate is a combination of silicon rubber pad (WMQ) and steel plate through sintering heat treatment. Vacuum lamination and rapid lamination heat treatment equipment are used to process electronic products such as FPC flexible circuit boards, electric heating elements, battery conductive wires, etc. The burnt iron plate combines various high-quality steel plates and silicone pads, all of which have good flatness, thermal conductivity, and buffering properties, making the product well formed, with better filling performance and bonding.

process parameters

1. It is recommended to operate at a temperature of 160-190 ° C. If the temperature is maintained above 200 ° C for a long time, the silicone gel is prone to aging and reduce its service life;

2. If the compression pressure is higher than 100kg/cm2, it will reduce the service life;

3. If the pressing time is above 80sec/time, the service life will be reduced;

4. It is recommended to test the flatness of the hot plate of the equipment every month, and ensure that the sealing degree of the upper and lower hot plates is below 0.01mm